Brodix Track 1 Series Cylinder Heads/23°
The BRODIX Track 1® has a 221 cc intake port and a 67 cc combustion
chamber.
This head was designed for the drag or oval track racer who wants a
lighter weight cylinder head that can make a significant difference in
horsepower.
The BRODIX Track 1® has a very thick deck that is compatible with
nitrous, and comes with phosphorous bronze valve guides and hardened
valve seats installed for unleaded fuel.
*The spring pockets must not be cut any larger or
deeper than 1.550.
The BRODIX Track 1X was designed as the next step above the Track 1.
An additional 20 to 25 horsepower may be gained with this head out of
the box over the traditional Track 1.
BRODIX has incorporated improvements such as a 40/60 valve spacing,
CNC machined combustion chambers, 2.100 intake valves, and new intake
and exhaust ports. The
222 cc intake port flows over 285 cfm at 700 lift. The exhaust port
flows over 195 cfm at 700 lift.
*Track 1X requires a T&D Economy or Jesel shaft system.
The BRODIX Track 1® is also available completely CNC ported at an
economical price. CNC porting ensures maximum consistency between each
intake and exhaust port.
No special components are required with the CNC ported BRODIX Track
1® head. This head is available in three intake port volumes. Exhaust
ports accommodate a standard Chevy pattern only.
More Brodix Products
In the News
Member Of
